How Do I Rack a RAY Encoder?

  • Updated

Resi’s RAY Encoders are small and portable, making them a great streaming solution both if you’re mobile or in one location. You can mount a RAY Encoder on a physical wall with the kit Resi sends with the encoder, which helps keep your streaming equipment in one location and the encoder out of the way. 

You can also mount a RAY Encoder in a standard rack using the third-party racks recommended below, which is useful if you want to consolidate your technical equipment in one location. 


StarTech 1U Server Rack Shelf for 19-inch Network Equipment Rack

The StarTech 1U Server Rack Shelf is a ventilated shelf you can mount a RAY Encoder on by using the bottom slats to pass screws through that fit into the bottom of the encoder. The apparatus fits into a standard rack. Learn more 


Intel NUC Rack Mount 19-inch kit 1U

The Intel NUC Rac Mount has three slots where you can mount RAY Encoders and the apparatus fits into a standard rack. Learn more


The peripherals we described in this article are recommended based on how well they have worked for other Resi customers. However, your specific organization’s recording setup and needs may not be compatible with these third-party devices. Resi cannot provide support for these products and recommends that you either contact your specific device’s manufacturer or one of our local resellers to inquire about signal integration services.

Was this article helpful?
0 out of 0 found this helpful